What to pay attention to when charging RC model car

1. Connect the charger. Insert the battery with the correct wire, making sure to insert the balance wire with the correct polarity (red positive to red positive, etc.) remote control  hobby，to avoid short circuits. If you forget to plug in the balance cable, most chargers will give you an error when you try to start charging.

2. Configure the charging mode. Some chargers usually automatically detect the type of battery you insert, if not, you need to manually switch the mode, choose "lipo" for lithium batteries, and "NiMH" for nickel-metal hydride batteries.

3. Start charging. After the configuration is complete, click the Start button. The charger may check your battery before asking you to confirm the battery count. If you get an error, you need to go back and adjust the settings. When charging is complete, many chargers will make a sound or flash to confirm that the process is complete. Turn off the charger, then disconnect the battery.

like：

Ni-MH battery or lithium battery for rc model car?

What's so fun about playing rc model cars?

What are the characteristics of the oil-powered RC model car?